FPV camera mount for wings and planes
Description
Here is my simple version of the camera mount to dig and glue into the wing or plane foam. It's for full-size cameras like Runcam Swift. It requires the three hole body, as it has the prominences, which slides into the mount and locked with two bolts. This is compatible also with Runcam's Night Eagle, as it has a thicker body. If you need a micro camera mount for wings, check out [Spec wing camerapod by Eepp](https://www.thingiverse.com/thing:3324071) Print in 98A TPU, add M3 nuts, glue them in place with CA glue (Loctite, etc), cut a hole and glue with some PU glue (Gorilla, etc). Print in 100% infill. The model is created to be hollow, so don't be frightened. Nothing wrong with your settings :D It'll have two perimeter shell and 100% filled bumper on the front.
Statistics
Likes
27
Downloads
0