Caddx Turtle / Split Mini 2 mount for Mobula 7 / Betafpv frame
Description
HD Camera mount to mount a Caddx Turtle or Runcam Split Mini V2 on a Mobula 7 or Betafpv frame. This consists of 3 parts: the base frame, 4mm standoffs, and the camera pod. The base frame has 8mm standoffs to provide room for a VTX such as the Eachine VTX03. Just use double-sided tape to tape the VTX to AIO FC. It also has a buzzer mount. To mount the base frame to the Betafpv 75x frame, I use 1.4 x 5 x 5mm screws. ( https://www.amazon.com/gp/product/B07G8YM6W9) To mount the camera pod to Caddx Turtle (or Split mini 2), I use 4mm M2 brass (female-female) hex standoffs, m2 washers, and 12mm M2 screws. If you don't have M2 brass standoffs, you can use TPU standoffs I just added on 1/4/2019. Print using 0.2mm layer height and 100% infill. 1/4/2019 Update: 1) Added 4mm standoffs if you don't have M2 brass standoffs. See picture on how to install the standoffs to the camera pod using 12mm M2 screws. 2) Added a taller Camera pod to enable higher uptilt camera angle.
Statistics
Likes
55
Downloads
0