Hex shelf insert paint tray
Description
This is an insert shelf that fits within the hex shelf available from The Range in the UK. However, if you have a hex shelf with an internal dimension of 186mm it should work for you (measured from one side to the opposite side). The link of the shelf from The Range https://www.therange.co.uk/storage/shelves-and-racks/shelving-units/hex-wall-shelf-kit/#936067 You need to print 2 of the full hex inserts out (or 4 of the half inserts) and then print 4 of the joining arms. I used an 8mm brim when printing so ensure it stuck to the bed correctly, however, you may need to use a raft. Some minor sanding may be needed to get a snug fit within the shelf, and for the support arms to fit in the slots. I glued my support arms in place to hold everything together more solidly. For the gap between the front panel and the back i used an Army Painter bottle laying on its side (25mm ish if you want to measure it out. I use mine with The Army Painter paints and some 12 ml dropper bottles so any bottle between them sizes should fit fine. Vallejo, are a little tighter fit so a quick sanding of the openings would give the needed space.
Statistics
Likes
24
Downloads
0