toilet seat power drill M6 long nut driver
Description
A long nut to fix a toilet seat from below with a power drill quickly. It is hollow inside, so the threaded rod can go inside. But since it is desgined to be printed with 0 support, i added one layer of material at the end of the nut, closing the hollow inside part(see screenshot of onshape). this thin wall has to be cut out with a cutter before use. Print upright on nut side. Powerdrill should be able to take a 10mm hex mount. Printing time: about 30min on my delta. https://cad.onshape.com/documents/ebabc437b78a91c844c28b05/w/6132a81c04b489578a3a0846/e/7fbc39033975c5b97165682a
Statistics
Likes
8
Downloads
0