GOPRO HERO 5/6/7 clean vlogging mic kit
Description
when printing the adapter case do not use any support you will also need 2x button head m3 x 5mm screws these screw into the metal case from inside the mount. you will need 2 flat nuts. the nuts are recessed into the inside of the adapter case. use the provided screws to mount the base plate when printing the usb strain relief holder, i used support at 15% and print it with the wording facing up from the build plate to inatall the mount use the camera lock screw on the other side of the camera. please take note of the camera case i am using https://www.amazon.co.uk/Forevercam-Aluminium-Protective-Skeleton-Compatible/dp/B0789DDPM6/ref=sr_1_2?s=industrial&ie=UTF8&qid=1546735096&sr=8-2&keywords=gopro+case+forevercam
Statistics
Likes
5
Downloads
0