Z Axis Reinforcement for Prusa MK2s
Description
It creates more stable frame allowing putting one or more filament spools above. This mod does not require any changes in Firmware. Bottom parts connecting motor to the frame are actually a remix of the Original Parts: https://www.prusa3d.com/prusa-i3-printable-parts/ Does not require any additional changes Hardware or Software @ +0mm with reinforcement : https://www.thingiverse.com/thing:3337357/ Does require small Software change @ + 18mm with reinforcement : https://www.thingiverse.com/thing:3334944/ Does require extensive Software and Hardware changes : @ +30/33mm with reinforcement : https://www.thingiverse.com/thing:3337371 ---------------------------------- What You need : 2 pcs - 608zz bearing 2 pcs - m8x400mm threaded rod 2 pcs - m8x450mm threaded rod +8 pcs - m8 nut for the above *8 pcs - m8 washer ( note that the outer diameter should not be more than 18mm) 8 pcs - m3x20mm 8 pcs - m3ns nylon lock nut din 985 185g PET-G (21% infill, 2 perimeters) 2 pcs - m4x40mm 2 pcs - m4x20mm 4 pcs - m4 nut
Statistics
Likes
1
Downloads
0