Samsung Galaxy Tab Shelf Mount *UPDATED*
Description
Designed to mount to a utility shelf. All parts printed @ 2mm w/ 3 perimeters, 15% infill except for the two small hanging posts which, for strength, were printed @ 1.5 w/ 4 perimeters and 40% infill. The ball and nut parts print together. Supports required. All connecting parts thread together. The hanging posts are designed to not bottom out so you can adjust for the thickness of your shelf allowing for a snug fit when hanging the mount. Be careful not to over-tighten the threaded bits. Hanging posts are 36.5mm apart.
Statistics
Likes
13
Downloads
0