SC1000 RECK ENCLOSURE
Description
3D printed enclosure designed to replace the PCB enclosure in the SC1000 by Rasteri. For details on the SC1000 visit https://github.com/rasteri/SC1000 You can buy the main PCB bare here https://reckla.bigcartel.com/product/sc1000-pcb Here is the BOM for the hardware used in this design. Everything is friction fit, so you may need to adjust tolerances depending on the hardware you decide to use. <ul> <li>Qty 8 - Flat Head Screw - M3 x 0.5mm, 6mm Long</li> <li>Qty 2 - Flat Head Screw - M3 x 0.5mm, 12mm Long (The length of the screw is depended on the fader used, spacers may need to be used to adjust stem height)</li> <li>Qty 4 - Pan Head Screw - M3 x 0.5mm, 4mm Long</li> <li>Qty 1 - Should bolt - 8mm Shoulder Dia., 10mm Shoulder Length, M6 x 1mm Thread</li> <li>Qty 1 - M8 Washer</li> <li>Qty 1 - M6 Nut</li> <li>Qty 1 - Ball Bearing - 608 (Shielded, Sealed, open, its up to you)</li> <li>Qty 1 - Magnet - 1/4" Dia, 1/8" Thick, Diametrically Magnetized</li> </ul>
Statistics
Likes
5
Downloads
0