Raspberry Pi Cam 2 mount
Description
Check out my etsy store. https://www.etsy.com/shop/HotSquare The is a Raspberry Pi Camera 2 mount. It was original intended for use on a Prusa MK2s but has evolved a bit in the past year. I thought it was time to share. There is some remix in this but I cant figure out whom the original camera frame came from. I wanted 2 axis of movement to adjust my camera. This mount will allow just that. You need to print it out of anything stronger than PLA. Parts are oriented for best results but feel free to tinker with it. Base 1 and Base 2 need to be glued or affixed together by other means. Glue is easy. I have small guide holes in case you want to use hardware. 2 Generic screws needed to fix the camera base plate to the camera frame. I don't suggest gluing this. If you want a upside down mount but right side up camera orientation (you don't need to rotate camera in software because oriented correctly). Then use the camera frame and back plate labeled with upside down. This works will with wall mounting, boxed frame printers, lack mounting and so on. I have been using this for more than a year with very little need for adjustment but I intend to add more bracket options as the need arises or requested. Happy printing.
Statistics
Likes
8
Downloads
0