Kossle Magnetic Upgrade v2 - Diamond Hotend - 15mm Magnets
Description
This is a Magnetic Diamond Hotend effector for my [FolgerTech] Kossel Magnetic Upgrade - V2 "thing". ( https://www.thingiverse.com/thing:1064124/comments/#comment-2257012 ) I created it over 2 years ago but have not had the opportunity to test it as of yet, so please keep that in mind. I did print it out, and it holds well, but I have not tested actual printing with it yet. I modified Olooki3D's effector and added 'ducting' to the side of the cooling fins to force the air through the heatsinks better. It can be assembled with the heatsinks aligned with the towers (probably preferred) or between the towers depending on how you mount it to the base. This is designed for 15MM round dish magnets, and to be used with my magnetic attachment design. (Link above) Again, this is currently UNTESTED beyond fitament. *NOTE* It's probably a good idea to use a silicone 'sock' or similar for the hotend. I actually smeared automotive High-Temp Silicone gasket maker on mine (about 2mm thick), and made a 1/16" insulator between the heatsinks and the Diamond nozzle with a shape cut out of a sheet of High-temp Silicone Gasket.
Statistics
Likes
11
Downloads
0