Micro wire cutter hanger
Description
I do a lot of 3D printing and use a plier style micro wire cutter for a number of purposes: - cutting filament ends - removing FDM support material - popping parts off of FDM and SLA built platfroms - cutting off SLA support structures. I have a wooden bar with strip magnets in it that is useful for hanging metallic tools. That is how I used to store these pliers so they were readily accessible. The only problem is that based on how they are made, they don't stick real strongly and can easily get knocked off fall into not easy to retrieve spaces. Today, I decided to do something about it and built this hanger that is glued to the mag bar with Goop adhesive. I thought of putting magnets in it, or steel but since I don't need to move it, I decided to just glue it. Now the cutters are safely and securely stored yet easy to access...and they won't fall down. The design I used wraps over the top of the magnet bar and that is where I put the glue. I am also uploading a version with several 1/4 inch holes for screws, if you just want to screw it onto something. While I am at it, I will go ahead and to a desktop version.
Statistics
Likes
21
Downloads
0