Z-Axis end stop shim for Ender3 Pro with Creality glass bed
Description
This is a really simple shim to offset the z-axis endstop simply slide it over the z-axis motor plate directly above the end-stop switch to stop your z-axis by 2.9mm (the thickness of the Creality Glass Bed. As it requires no screws or fittings it means you can add/remove it in a second freeing you up to switch between glass bed and magnetic mat as you like. Installation: raise the z-axis s othat you can access between the motor plate and the z-axis endstop switch. then slide the shim on to the metal plate s othe the flat side is at the bottom and inline (horizontally) with the z-axis endstop switch. It will now trigger the switch and stop the z-axis 2.9mm earlier, compensating for the difference in thickness of the default magnetic mat and the replacement Creality glass bed. (I've only got the E3Pro so have no idea if it works on any other set up) Please comment to let me know if it works for you or if you have a different z-gap?
Statistics
Likes
97
Downloads
0