Paste Extruder
Description
This my "Clay Blaster" but commonly name Paste extruder I made that tool as i want to print clay specificaly on my cnc So i had to use only the PWM signal coming out of the controller as i can't control a 4th stepper motor you will need 2 X 12mm diameter by 320mm long rod 2 X 12mm dia linear bearing 1 Hex M5x40 1 RC spring 2 X CHC M5x12 1 M8 Half nut 1 threaded rod M8x220mm long 1 L298N 1 syringe dia 35MM (100ml)
Statistics
Likes
17
Downloads
0