Ender 3 | Nozzle Holder
Description
UPDATE! New .stl with better tolerances as requested by the community. __________________________________________________________ Easy to install nozzle holder with nozzle size text. This nozzle holder works perfectly together with this 7mm socket holder: https://www.thingiverse.com/thing:3366759 Installation: - Unscrew the front leftmost screws holding the computational hardware - Gently bend the black box with the electronic board down so that the two v-slots in the frame is visable - Insert the printed nozzle holder and if its a tight fit, hammer it in carefully and gentle - Screw the two screws in at the front and your all done! Print with a small nozzle (<= 0.4) at a slow speed to get the v-slots in good shape. Took me 5h to print it. Print it upright but upside down with a large brim.
Statistics
Likes
570
Downloads
0