Ender 3 Binder Clip Attachment
Description
*WARNING* It looks like after lowering the profile to 1.2mm a few clips have broken when in use!!!! Be careful!! They only lasted 3 prints at 60degree bed temperature!! I've added the 2mm durable version to the files. *The ones in the picture are the first design at 2mm. They still work and are only slightly warped after use. The current design at 1.2mm has broken. I need to rethink how to make these durable. Print at your own risk!!! Never leave a print unattended!!* These are designed to slip over the original binder clips given for the Ender 3. These are to be used with a glass bed since the original binder clips are too small to fit over the aluminum, original black pad, and glass bed combined. They are low profile and should not touch the printer fan/ring vent when operating due to their slimness. No supports, .2 resolution, printed upright with the hole on the bottom. Aluminum bed + original black plate + glass bed = binder clip retrofit attachment I also made some plate clips but they don't work very well and are more for show.
Statistics
Likes
45
Downloads
0