CNC Dust Boot Bosch Colt Router
Description
A compact dust collector boot that fits the popular Bosch Colt router with 89mm body. A standard (small - 1 1/4 inch) shopvac hose fits the outlet. Groove around the bottom perimeter (5 x 15mm) accommodates the brush strip. (I had anticipated needing to hot-glue the brush into the groove, however since it gets inserted a full 15mm, no adhesive was needed.) One bolt for the clamp knob is needed (1/4-20 x 1 1/4 L). The brush strip is available on ebay... https://ebay.us/jD73Dx. Most likely also available on Amazon.
Statistics
Likes
15
Downloads
0