Bed Clamp for Ender 3 with 4mm Glass bed
Description
Clamps to hold the Creality Glass bed on an Ender 3 printer. The glass bed is 4mm thick. I used 7 of these to hold the bed. Do not put one on the lower left side as the nozzle will hit it and knock it off. You could hold the bed with only 4 but I wanted it more secure. EDIT - Added a v2 that has small bumps added to make it fit tighter if needed. Add corner version. Update - If you are using PLA to print and heating the bed, the clips will release after about 3 prints. Recommended to use ABS to print the clips for use for printing PLA if the bed is going to be heated. If you are not heating the bed the clips seem to hold just fine.
Statistics
Likes
371
Downloads
0