Rick and Morty LED Torch Portal Gun Keyring
Description
A fun little keyring modelled on Rick's portal gun from the cartoon series Rick and Morty. 3 LEDs are illuminated instantaneously when the button is pressed. Electronic components needed: 3x 3mm green LEDs 1x 6x6x6mm push button microswitch 1x CR-2032 coin battery holder 1x CR-2032 coin battery 2x small wires Solder Soldering the circuit is tricky due to the small size. It's easiest to connect the wires to the microswitch and run them through the holes into the case. Solder the correct LED legs together and bend them so the LEDs will fit in the holes in the case. It may be necessary to trim the tags of the battery holder so the circuit will fit into the case. Solder it all up, insulate it if necessary, test it, then squish the lid on and secure with superglue. Done!
Statistics
Likes
18
Downloads
0