HawkbaitFPV - wHDoop - HD Camera Whoop Mount
Description
This mount is designed to work on any 65mm or 75mm quad copter with prop guards. the mounting holes are configured to align with the new series of all in one ESC FC combos that come standard in the betaFPV brush-less quad copters and similar models. Ive tested the print on the beta75 pro 2 with 2s and it runs very well. This print also fit on the US65 1s quad copter but with 65mm 1s builds unfortunately do not have th power to lift the 46g all up weight. 1.5 moved the turtle camera mount holes moved rearward and the turtle control board shifted up. **1.7 lite is the most recent version, moved the turtle mounting holes up again in an attempt to gain more space for the wiring. also moved the overall mount down closer to the FC to keep the CG lower. Increased the size of the weight reduction holes and adjusted the location to make the print easier to handle on the slicer. At the moment the weight based on the slicers estimates is 3.6g. Add that to the 12g for the turtle and the total weight increases by about 16g. If your craft has the leftover thrust this is a great option. I also added a CG model at the request of multiple users with the control board shifted exceptionally rearward to shift the center of gravity backwards without adjusting the battery placement. This is still a work in progress so Ill be uploading more versions as I print and test them.
Statistics
Likes
21
Downloads
0