Hypercube Electronics Enclosure Floor
Description
This is a printable floor for the Hypercube Evolution Electronics Enclosure by melnikod. I broke it down into 6 floor pieces and 4 supports to be printable on my Prusa MK3 bed. My Hypercube is 300x300 built with standard sizes (the Z extrusions stick past the bottom by 10mm. The floor has supports off the bottom, there are 2 versions "Short" goes with the stock build without adjustable feet, "Long" goes with the adjustable leveling feet I remixed to fit this enclosure. There is also a mount for a Duet wifi or ethernet, a Meanwell LRS-350-24 PSU mount, and an SSR Mount that all fit on the floor and use the bolts that hold it together. I used (50) m5 x 16 button head allan bolts with washers and lock nuts to hold everything together. SSR Mount https://www.thingiverse.com/thing:3364579 Duet3d Ethernet/Wifi Mount https://www.thingiverse.com/thing:3364520 Meanwell LRS-350-24 Mount https://www.thingiverse.com/thing:3364526 Adjustable leveling feet https://www.thingiverse.com/thing:3364556
Statistics
Likes
12
Downloads
0