Hypercube Evolution PanelDue 7i Mount & enclosure vents
Description
I took the already great PanelDue 7i mount from kuhnikuehnast and modified it to fit on the front of the Hypercube Evolution Electronics Enclosure by melnikod. I changed how it mounts to be able to mount it in front of enclosure with 2 m5x10 bolts with t nuts to hold it to the bottom crossbar extrusion on the printer. I also added a hole for the speaker and the letter R on the reset button. The previous design already had a slot for the sd card that is perfect as well as a small hole to use a paperclip to hit the erase button. I also modified the front vent grills to be open behind the PanelDue and have vents on the sides. The 1 design without switches can be used on both sides just by flipping it around. The other has 2 switches - 1 labeled power, 1 labeled lights. They are for 16mm push button type LED switches. ***Update 2/8/2019*** Added 2 new switch panels with 3 switches - Power, Lights, Fan - 1 version to mount on left side of display, 1 version on right side of display.
Statistics
Likes
36
Downloads
0