3D printed RC SnowRacer
Description
Rover built to maneuver offroad, with a quite unique "wheel" design. Does NOT run well on tarmac/inside... Really fun in the snow! Might work fine in the sand as well. This is the parts I used to build this RC vehicle: (The motors are way overkill, this thing is brutal!) 2x ballbearing 3x8x3mm 2x motors TURNIGY D2826-6 2200KV OUTRUNNER MOTOR 2x HOBBYKING 60A ESC 4A UBEC Battery: TURNIGY NANO-TECH 2200MAH 4S 25~50C LIPO PACK 1 remote control and receiver zip ties Microcontroller Teensy 3.2 (Can be built without) I added the .stl files for the frame and "drum wheels" if you would like to adjust it to fit other motors etc in Fusion 360. Video demonstration: https://www.youtube.com/watch?v=rcgwzqsqfyA
Statistics
Likes
39
Downloads
0