DJI Phantom 4 Pro - FPV Racing Version
Description
<h1>DJI Phantom 4 Pro - FPV Racing Version</h1> I was lucky enough to get a DJI Phantom 4 Pro display model given to me; it's basically the shell, motors (with no wires), camera gimbal + motors (and no camera) so I decided to FPV it up and make a 6S Racing beast. There's plenty of space inside the arms for a 30a esc's and room enough for a 30x30mm stack above the camera gimbal. The display model came with working brushless gimbal motors, but I didn't want to ruin these (as I could either sell them or re-use them elsewhere) so I needed to lock up the gimbal at around 30 degrees, make a mount for a runcam mini swift and make a few mounts for a FC stack. If you're familiar with building racing quads then this should be no challenge for you. I used up "spares" to build this, may be tempted in the future to put GPS on it and turn it into a long range quad. I wanted the changes to be as discreet as possible and to raise a few eyebrows when powerlooping a P4 through a fpv gate... https://youtu.be/1BPWFxk-HNM Edit: <a href="https://www.banggood.com/custlink/vmmKBvrTQ9">Looks like Banggood are selling a knockoff P4 Shell now</a> 
Statistics
Likes
6
Downloads
0