Hypercube X Carriage with mount for 22 pin Molex Plug
Description
I modified this X carriage (uses standard LM8UU Bearings for 8mm rods) to hold a Molex Micro-Fit 22 terminal plug. Link to plug: https://www.digikey.com/product-detail/en/molex-llc/43020-2200/WM2487-ND/531403 The plug will sit directly above the cable chain I use allowing me to bring the wires from the chain to the plug, then wire my hotend to the matching plug for quick tool head removal. I haven't printed it as of yet, when I do I will upload pictures. It looks to be a tight fit, however if you are good at routing wires it should work, once again as I get mine built/wired I will update files and change fusion screen shots for actual pictures. I have attached screenshots from Fusion 360 so you can see the alignment. This is the cable chain I am using - https://www.thingiverse.com/thing:2823973
Statistics
Likes
7
Downloads
0