Desktop organizer - Modular Storage System
Description
This could be a remix but I can't point to multiple origins and I designed all from scratch. However I tried several designs which just were not THE thing for me ;) Especially connections were not the dovetail which I happen to like. Inspirational thanks and credits for seeding my thoughts will go to - O3D https://www.thingiverse.com/thing:2539830 - O3D https://www.thingiverse.com/thing:1743145 - gpvillamil https://www.thingiverse.com/thing:421886 - AndrewBougie https://www.thingiverse.com/thing:1489606 I wanted to make modular, stackable interlocking system with some extras. Also wanted to make it relatively easy to print. Module size is 40x40x80mm. (M in STL-names, so 2M is 40mm high-80mm wide-80mm deep) You have different drawers for every module size (1M, 2M, 3M) Single drawers, divided 50-50 or even 4x25. One 1M drawer is for SD cards. (I printed and colored SD card from Ubergeekking https://www.thingiverse.com/thing:710938 and glued that to SD drawer) On top you can print a pencil/tool holder (1M, 40mm deep with 8 holes) On the finishing line I decided to make optional holders for labels. Those are just glued to drawer with SuperGlue. You can use optional legs if you wish. Those will give a small opening under the storage and help also using bottom drawer handles. I fastened storage system to my table with some blue-tac, there's a small cavity under the leg.
Statistics
Likes
137
Downloads
0