lazy paper
Description
This mountable paper holder is completely 3D printed except for the screws of course. This is a paper holder that is mounted using rails that can be screwed directly into dry wall. It is extremely minimal design and doesn't take very much material to make. I got the idea from a project I did in wood shop that was a dish towel holder. This thing is still a work in progress, meaning that it can only hold one paper at a time with an actual marble and it doesn't stay in super well. I am testing it with a 3D printed marble at 50 microns because it would be rougher and may hold paper better. UPDATE: the printed marble works fantastic and can hold much more paper so definitely use that if you want to be able to hold packets. IMPORTANT: you will definitely want to print the screw test first to make sure you have proper screws that will fit in the holes well and the rails will work, if they don't you can mess with the stl. ALSO: be sure to watch this thing, because I will be making a quite a few add ons and more information as I develop it more. Assembly: When you are putting the rails together you can use super glue in the joints instead of using a ton of screws, and if you do that it is only necessary to use 2 screws. USING: When you want to take the paper out push it up into the holder more and at the same time push the arm inward so that the marble isn't touching the paper and then pull it out.
Statistics
Likes
8
Downloads
0