eGPU Enclosure | Designed for AKiTiO Thunder2 + ITX GPU
Description
A custom eGPU enclosure designed for the PCB from an AKiTiO Thunder2 (other AKiTiO PCBs may work as well). Sized to fit an MSI Aero ITX GPU. Screw holes sized for #4-40 machine screws. May use metal insert from original enclosure to help hold GPU in place. Optional stand. NOTE: This is currently a prototype design. My first print of it in PLA revealed the following issues: - Walls are too thin which makes the whole structure flexible and fragile - Screw hole placements may be slightly off. Check against measured dimensions of your PCB - Back cutout may need to be widened to reach top and bottom GPU ports - Exterior is not smooth using current printing technique
Statistics
Likes
2
Downloads
0