Bike Ski, Strap Mounted Ski for Bike Tires 26" 27." or 29"
Description
Bike Ski, Strap Mounted Ski for Bike Tires (sized for 26" 27." or 29") Print off 2 to capture your tire on the ski, Ski can be any ordinary ski cut down or kids skis, what ever floats you boat. MAKE SURE IT IS A SOLID PRINT NO DELAMINATION OR OTHER DEFECTS!!! Mount by screwing platforms to ski back to back. Make sure screw aren't to long or they will protrude through (pre-drill so it doesn't spit core & adding a little wood glue to each hole helps a ton) wood screws work best. Print from strong material PLA probably won't cut it sorry, ABS should work ok. Position ski with tip out a little I would drill hole in the tip and mount a bungee to it up to bars or something to keep tip from nosing over if you catch air (this would result in a little swearing I think) Insert tire on ski mounts strap in place and give her a whirl. This is probably not the safest thing in the world, Fun - but not safe. WEAR A HELMET!! there are many things that can go wrong be safe and in control at all times. DO NOT USE WHILE STUPID! I ASSUME NO RESPONSIBILITY IF YOU TRY THIS PRINT? Credit for Bike Model: Andrew Bowen - Grabcad https://grabcad.com/library/specialized-p1-jump-bike-1
Statistics
Likes
41
Downloads
0