Cylinder Lamp (Single Wall)
Description
This is a variation of the Cylinder Lamp from LCO (thanks!). The shade parts are single walled with 0.8mm instead of the original double walled original ones. This reduces the amount of 1.75mm PLA filament for the shades from 105m total to 55m total. Also the dimensions in the shade files are now properly set (~180mm diameter). Use 0.4mm nozzle and 0.2mm layer height and 20% fill for the ring part and no fill for the shades. Glue bottom part under and top part over the ring part. Hang up lamp with Hemma lamp holder from Ikea or any other compatible lamp holder. Afterwards be proud you'd build your own lamp :)
Statistics
Likes
9
Downloads
0