Ultralight Fishing Rigbin with internal compartment
Description
Did you always want an ultralight Rigbin for your UL-Anglin needs ? Reliable, affordable and cool ? Something sent to you by the machine gods in your mancave ? Something you can gift your fishing buddies ? Don't look any further, here it is ! Praise the filament and print in 0.3mm layer height, in PETG, ABS or PLA. Or print it in PC and use it as ammunition for your potato cannon. Please print the Body standing, as like in the preview, you should be able to print good bridges of 5 cms and please support the first 10mm of the print from print bed only, there is a built in stop for the bottom cover and that was the best way to do it. If you use Simplify3d please make manual supports under the little ring beneath the internal screw-thread. Please print the Cover upside down, no supports. Please print the compartment closure upside down as in the picture The grip should be printed lying on the printbed. The rail should be printed as like in the picture. The sheet can be printed in TPU so you can stick your hooks into the material, you could also use some thin insulation foam. Have fun. And I'm not responsible for anything you do with this.
Statistics
Likes
13
Downloads
0