Geared Maker Coin - Multi-Material
Description
Immediately when I saw this maker coin for the <a href="https://prusacommunity.com/december-2018-print-contest/">Prusa Community's December print contest</a> I <i>knew</i> I wanted to print this with my MMU2.0. <a href="https://www.thingiverse.com/BobaMaker/about">Boba Maker</a> was kind enough to share the files so I could do just that! This should be a very easy print as long as your multi-material printer is tuned! My shortest print-time was around 6.5 hours for two colors and 13 hours for all five colors. <strong>File Notes:</strong> Just to explain the way I have the files setup; -Each zip file has folders for 0.2mm, 0.35mm, 0.5mm tolerances for that center body design. -Each zip file includes the high-infill mesh modifier. -Each zip file includes a .3mf file for the 0.35mm tolerance (with my MMU2.0 & filament settings) -The <strong>plane</strong> zip file has .3mf files for <strong>each</strong> tolerance. -My recommendation is to use the plane .3mf files as a template and to swap out the center body you want to print with. This should make it easier to swap out the different designs without having to re-setup all of your settings. -I've included the high-infill mesh modifier.stl outside the zip files because Thingiverse wants at least one stl. Have fun & happy printing! <b>01/30/19</b> - I've added a new design with the Prusa Research logo as suggested by Boba Maker
Statistics
Likes
157
Downloads
0