10$ Electric Mountainboard motor mount for MBS/Trampa trucks 5065/5045 racestar
Description
the 10usd mountainboard motor mount for 5065 motors here's how to make a motor mount for mbs or trampa mountainboard under 10usd or 8e in 4 simple steps (printing not included) the parts list is under it btw have fun this mount is pretty simple to setup and works with any mountainboard truck that has a 8m hole for braking system like MBS ats and every Tampa trucks i used stainless steel but inox or regular wil do just fine 1-use the 8m rod in the holes on the truck and clap down with 2-8mbolts 2-slide over the 3d printed mount (prototype first before instaling) use 2-8M bolts 3-instal 5065 motor(s) 4-horizotaly mount the 4-5M rods with the 16bolts i printed it in ABS because PLA can become brittle in low temp other then that it works fine and i used a 80% infill for a twin engine setup you need -2-- 5065 motors ( i used racestar 5065 200kv) -2-- 8M theaded rod +/- 18cm -4-- 5M theaded rod +/- 25cm -8---8M srews (selflock nut or thead locker is advised) -16--5M srews (selflock nut or thead locker is advised) and a gear system as you like i have best result when a bearing fits the wheelpulley itself like on evolve pulley's but a chain works also with a belt setup this pulley works best for me IF YOU NEED ONE FOR 6354/6374 motors you can find it here https://www.thingiverse.com/thing:2901312
Statistics
Likes
19
Downloads
0