PI Zero Wifi Cam Enclosure - Surveillance
Description
This is an enclosure for a wifi camera setup for surveillance use. The basic idea was to develop a camera enclosure that is equipped with a very small "cam-head". The following items have been used: - Raspberry Pi Zero W - Micro SD Card - Jumper cables - Aufee Cam Modul Kamera (https://www.amazon.de/dp/B07KZRJH61/ref=cm_sw_em_r_mt_dp_U_LL3tCbKSHJPD1) - PIR Motion Sensor (https://www.aliexpress.com/item/10-pcs-Mini-IR-Pyroelectric-Infrared-PIR-Motion-Human-Sensor-Automatic-Detector-Module-AM312-Sensor-DC/32887567160.html?spm=a2g0s.9042311.0.0.7b5f4c4dOddcUt) - Mini Switch (https://www.aliexpress.com/item/10Pcs-3-Pin-PCB-2-Position-1P2T-SPDT-Miniature-Slide-Switch-Side-Knob-SS12D07VG4/32723119383.html?spm=a2g0s.9042311.0.0.5cb34c4d3jTjN8) _____ Software: I use NodeRed to send a video clip via Telegram to my Phone. The PIR sensor activates the video and Wifi of the Raspberry. As soon as the video-upload is finished the wifi will be switched off. A slide switch will be used to put the Pi in Service mode. Then I can perform updates or improve the usability etc. This is a battery based system, therefore I would like to switch of some main energy wasters... _____ In case of questions, please do not hesitate to comment. Feel free to share design improvements.
Statistics
Likes
20
Downloads
0