CR-10S Pro Customizable Glass Bed Clip Extensions
Description
**Update: Now customizable as well!** Attached STL is for a 310x310x3mm glass sheet. For different glass dimensions, try out the customizable model. Parameters include: * Clip Width - in case you want the clips themselves to be wider. Can't go too much narrower due to the width of the metal clips. * Glass Thickness - In case you want to use 4mm glass or similar rather than 3mm. * Glass Y Dimension - Measure the actual length of your glass plate from front to back and enter it here. This will adjust the clip to fit appropriately. Extensions to accommodate a 310x310x3 glass bed on a CR-10S Pro. This is a common size glass bed, but doesn't quite fit the oem clips. With these installed you don't lose any print area as the printer doesn't print all the way to the back of the bed. Just slide them under the oem rear clips and then slide your glass plate into them and secure the front clips. Printed in PETG for more heat resistance. I wouldn't recommend printing these in PLA.
Statistics
Likes
65
Downloads
0