LASER for CR10
Description
I wanted to transform the stock CR-10 in a laser engraver machine but using a more powerful laser than the one you can buy from Creality. I then purchased a 5.5W laser from aliexpress with TTL input. the stock CR10 has a second port for fan (which is a replica of the first one). The fan output is PWM (12V), while the TTL input of the laser was 5V, you can find also laser with 12V TTL, but I found them after I bought mine. you can translate the 0-12V to 0-5v with a simple trimmer and a tester. for the engraving software I am using LightBurn, a very nice one. as usually enjoy and if you need any help please let me know.
Statistics
Likes
16
Downloads
0