Dugout Box - Small
Description
This hitter box prints in three pieces plunger, box, lid. An m5x16 screw and a pen spring are required for the project. Threads are modeled into the box, print at layer of at least .15 or lower. I make my own hitter bats out of brass, however this should fit the standard smaller sized bats. Print all items, put spring onto plunger nipple, put down the hole spring first, push down with hitter until you hear/feel the spring snap onto the bottom nipple, it won't take much force. Everything should go together nicely, It did for me but I modeled it with the parts I had at hand in mind. I used a screw out of the extras bag from a Prusa MK3 and spring from a Bic pen.
Statistics
Likes
9
Downloads
0