Cooling duct for MMU, D6 for 5015 blower
Description
I recently bought a 5015 blower to upgrade the part cooling. I didn't want to lose any print area and would like to add an enclosure in the future and an induction probe. I couldn't find anything that met these requirements that would work with the fan I bought. Currently I'm using the "duct old.stl". <strike>It does limit print area by about 1 mm along the right side. The "duct new.stl" should fix that but I have not printed it.</strike> I just checked travel distance and while it does hit the inside of the case, it does not seem to limit print area. The "duct new probe" has a threaded mount for a M12x1mm threaded induction probe. I don't have a probe yet and have not printed this. There might be problems in the front right corner, I'm not sure. This design puts the blower behind the extruder block and keeps the weight really close to the screw mounts. This should help avoid vibration and sagging and looks very good. You can reuse 2 of the 3 original M3x20mm screws to mount the blower. You can either tap the holes or use brass injection nuts like I did for the blower. You will need 3 M3x10mm screws to attach the mount to the radiator. Here's a link to the fans I purchased: https://www.amazon.com/dp/B0755BY9RH/?coliid=I3EMGF0XDPWPNH&colid=22UHR1GBKGDHL&psc=0&ref_=lv_ov_lig_dp_it
Statistics
Likes
19
Downloads
0