Strain Relief Bracket for MK2B Heater PCB 12V and 24V
Description
These are strain relief brackets for the RepRap MK2B bed heater PCB, variants for 12V and 24V wiring. The channels are 3.5mm and 3.0mm respectively, and designed for 14-18AWG silicon covered wire. The channels for the thermistor wires are designed for 30AWG silicon covered wire. I glued mine to the PCB with epoxy, spread more epoxy on the mating surface and glued the two parts together with the wiring in place. This creates a permanent strain relief that will be difficult to remove, so test your wiring before gluing!
Statistics
Likes
4
Downloads
0