RPi 3.5" Touchscreen Case & Stand
Description
Raspberry Pi 3.5" Touchscreen case & Stand ================================== Got this touchscreen for Raspberry PI, but it does not fit the OrangePi correctly, and i dont want it mounted directly on the PI cause I think it's probably not great for cooling.. So i designed this case for the touchscreen and a stand to mount it on.. Now this is not the final version, cause i've had few ideas along the way so there will be a versin 2.0. If you need any of the hardware it's very cheap, the bolts come in a box of many but it's great to have extra ones for other projects. I have linked the items below. #How to 1. Print the model 2. Put the screen in 3. Clean up holes with a drill if needed 4. Heat up the nuts and press fit them in the back of the lid 5. Put the bolts in and screw tight If you want to mount it on the stand. skip step 5. for now 5) and put 4 bolts on the inside of the lid 6) Put bolts in the holes in the stand 7) Screw the lid to the stand 8) Screw the rest of the case to the lid ** Also, if you want to mount it to anything else, the mounting holes are 3mm with 20mm spacing (from center to center ofc) #Hardware [3.5 inch TFT LCD Touch Screen](https://www.banggood.com/custlink/GD33d5L7QE) [M3 Bolts](https://www.banggood.com/custlink/m3Dmd5lTwE)
Statistics
Likes
34
Downloads
0