Pinch & Pull Tube Squeezer
Description
I have an engineer friend that pointed out a few design changes needed. I made this one longer with a 60mm squeeze area along with a complete redesign. I also added a shorter one for smaller tubes. Misc. Notes: I decided to design this tube squeezer thinking that it is the most practical and easiest to use. You be the judge and let me know. :-) The total useable squeeze inside lengh is 60mm or 2.4in and the small one has a 43mm or 1.7in inside length. Please let me know if you think this is the absolute best tube squeezer you have ever come across! Thanks! 200C Extruder 60C Bed 60 mm/s Speed .1mm Layer Height
Statistics
Likes
11
Downloads
0