Famicom Disk System Secondary Gear
Description
This is a replacement for the secondary gear in the disk spindle of the Famicom Disk System (the gear that is not on the same axis as the other 2 gears). This is a work in progress. I do not have access to a gear for measurements, so I have been basing this off of pictures and the other gears thus far. If you can provide more accurate measurements, please contact me! in particular, I need the number of teeth on the smaller gear element. I believe this to be ~15-20 teeth. Once I have this, I can make some prototypes and finalize the project! Thanks to catrenelle for the photos! new rev is up with the correct number of teeth on the smaller gear element and better tolerances in the z axis.
Statistics
Likes
5
Downloads
0