Light-up your print i3 MEGA
Description
The platform can be either used to just cover-up the under-part of the stock Extruder box, or like I did install self-adhesion LED-strips and wire them up. There is sufficient play to install little rubberrings to avoid vibrations from the fan. The cable holes are designed to fit standart 1,27mm Pitch Dupont-cable. The 4.8W LED-stripe I used is quite bright… I placed a 990ohm resistor on the + wire to reduce brightness and reflection on the print-bed. Have fun building!! Would appreciate some fotos of your builds =)
Statistics
Likes
36
Downloads
0