SDL Remote WX Solar Weather Case
Description
** 9-Mar-19 Have tested with a 6000mAh battery and works fine. Removed the thread for the Thunderboard hole and changed it to support a UV Sensor stalk. I have removed the Thunderboard from the Remote unit back to the base unit. ** 18-Feb-19 I changed the depth of the case from 2 x 29mm to 2 x 34mm. This should reduce the issue of potentially very tight fit for several battery sizes. In addition I created a deeper thread section for the Thunderboard pole.** This is a Case for a remote monitoring Station based on the SwitchDocLabs WeatherStations. This case supports the Solar Panel, SunAirPlus, and the Grove Pro Mini with WeatherRack and Lora Module. The Case is a remix of the excellent Customizable Rugged Waterproof Box from ZX82net. The licence is inherited from zx82net licence. (I usually don't worry about non-commercial) I have included the clips and latches I use from the original project, however there are some other options in the original project by zx82net. This also uses the SwitchDocLabs Solar Panel Holder from the SDL site, although I have modified it to allow for a self tapper screw if you use the WXSolarFrame.
Statistics
Likes
22
Downloads
0