Anet A6 Z-axis base socket
Description
When I installed the rear support, I noticed that the acrylic frame of the Z-stepper motors was slightly bent forward. So the axle distance of the Z-axis guide was no longer correct. To get the frame and the guides back into the right position I designed these sockets. I was mainly interested in stability and low space consumption. At the same time I was able to make the play in the hole for the Z-guide rod narrower. I deliberately left the base open at the front in case the Z-motors have to radiate heat. I couldn't see any influence on the printing result, but the leadscrews are now in the middle of the recesses again. _Printer settings:_ Material: PLA Resolution: 0.2mm Wall thickness: 1.6mm Infill: 30-50% Support: yes
Statistics
Likes
10
Downloads
0