Rock Pro 64 Case
Description
This is a case for the new Rock Pro 64.You need four m3 x 45mm screws and nuts. The fan is a 30 x 30 x 5 and I used two m3 x 20mm screws and nuts. The case is tight and once you put in your RockPro64, it will be difficult to remove it. Remember to remove the SD card before putting this in the case. Finally, I tapped the holes for extra protection, but it's really unnecessary. I included the Fusion file so that you can make modifications to it if you want to.
Statistics
Likes
6
Downloads
0