Dead Simple Bebop 2 GoPro Mount
Description
This is a simple GoPro mount for the Parrot Bebop 2. It mounts on the bottom of the drone, and fits into the front part of the frame. It's held on by the twisting shaft nuts. It's fairly secure as is, but you can use a zip tie on the front tab to hold it in place. Fits onto this bit: https://cdn.thingiverse.com/renders/08/9c/8f/e1/94/ff23203c7bfdedfe25288939de71cef0_preview_featured.jpg Note: You will likely need leg extensions to fit your camera under the drone. I'm using the ones linked below. https://www.thingiverse.com/thing:2939973 Also be careful not to block the sensors. Check your balance. I'm using a modified Bebop 2 which has a heavier battery on the back. This allows me to put more weight on the front without messing up the balance. I dont know how well this will work on a standard Bebop 2.
Statistics
Likes
15
Downloads
0