Anycubic i3 Mega Pi NoIR Camera Mount
Description
This mount clips into the opening in the aluminum plate under the heated bed. It requires no modification or part removals from the printer. I attached the clip on top of the aluminum plate to improve clearance for the Y axis belt. You will need to following hardware: 4 - M3x15 screws 4 - M3 nuts 1 - M4x25 (or longer) screw 1 - M4 nut The M3 screws and nuts are used to attach the face plate to the camera case. For greater security lock nuts could be used. The M4 screw is used to adjust the tension on the mount to pivot connection. The M4 nut should press into the opening in the mount. It was designed for a regular M4 nut and I do not know if a lock nut will fit the opening. The camera case sits onto a post on the pivot for easy removal (I made a second mount that is connected to my enclosure). The face plate is cut away to make removal of the camera ribbon cable possible without removing the camera from the case. The ribbon cable can be routed through the mount to prevent tangling. I printed at draft qualities as function was my concern and not appearance. Hope this is helpful.
Statistics
Likes
9
Downloads
0