Plant watering system
Description
This contains all necessary parts for a plant watering system based on Arduino Nano. The lower "floor" contains the cogs which are needed for giving a micro-servo the torque for opening a micro-irrigation system valve. The upper floor contains the electronics: Arduino Nano, a capacitor for the servo and (optional) cables for humidity sensor. The water storage is adapted from Water Tower by Scott. Arduino sketch is a simple timer for turning the servo. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/60qx5Y0iRqu
Statistics
Likes
8
Downloads
0