Cyclops(18mm) ready X/Z-axis with shortened bowden for Athorbot
Description
*** NOT COMPLETED YET 90%*** IF you're an Athorbot owner and you're tired of not being able to print with more abrasive materials like i am. This is for you. It is a work in progress however its coming a long nicely thus far. This will replace the 2-1 head with a e3d cyclops 18mm 2-in-2-out hotend. I am in the process of printing one off right now. I expect for there to be changes needed. however this first go should work however it might require tweaking. this version will require a mount for the endstop switch. use at your own risk. *** update*** I have managed to print this off with nylon(wow what a pain) i had to do custom support to get them to print. If any of you are having a hard printing this out. please let me know and i'll provide the solution I came up with to avoid warping. the only suggestion I can give at this point is that you need to make a large area without corners to hold down the model so it doesnt fail miserably. Using a material that is less likely to warp is also recommended however be careful what you choose if you're wanting to put this in an enclosure. for obvious reasons PLA should be avoided. while it gives the best quality of print, the first time you try to print it will just deform or worse. Thanks for your interest in my model.
Statistics
Likes
3
Downloads
0