adjusted SmartRap 8mm e3d mount With or without Chain mount
Description
<p> I adjusted the Smart rap Core extruder mount to accommodate a particular fan by moving the proximity sensor mount back some. I also added a cable chain mounting point. This is a work in progress and remains untested at present </p> <h2> Update 2-9-2019: Printed and Tested. </h2> <p> There was a collision problem causing the pieces not to fit. I was able to trim to fit the print and it is a nice improvement. I have uploaded a version that should work without needing trimmed/filed. <p> I also decided to run the extruder clip bolts all the way through the carriage using 1/8 in. toggle bolts 3 in. long. I put one of 4 bolts in the base to hold it while i drilled the holes through the carriage. It seemed strong enough that i didn't see a need for the other 3 base -> carriage bolts. The whole thing may, or may not, be able to be held on with 2 bolts even. </p>
Statistics
Likes
1
Downloads
0